PHP 8.3.4 Released!

Eingebauter Webserver

Warnung

Dieser Webserver wurde entwickelt, um bei der Anwendungsentwicklung zu helfen. Er kann ebenso für Testzwecke und für Anwendungsdemonstrationen nützlich sein, die in kontrollierten Umgebungen ausgeführt werden. Er ist nicht als voll funktioneller Webserver gedacht. Er sollte nicht in einem öffentlichen Netzwerk verwendet werden.

Die CLI SAPI bietet einen eingebauten Webserver.

Der Webserver läuft nur mit einem single-threaded Prozess, sodass PHP-Anwendungen nicht weiter ausgeführt werden, wenn eine Anfrage blockiert wird.

URI-Anfragen werden vom aktuellen Arbeitsverzeichnis ausgehend ausgeliefert, sofern nicht die -t Option genutzt wurde um ein explizites Document-Root anzugeben. Wenn eine URI-Anfrage keine Datei angibt, wird entweder index.php oder index.html aus dem aufgerufenen Verzeichnis zurückgegeben. Wenn beide Dateien nicht existieren, wird die Suche von index.php und index.html im übergeordneten Verzeichnis fortgesetzt usw., bis eine gefunden wurde, oder das Document-Root erreicht wurde. Wurde eine index.php oder index.html gefunden, wird sie zurückgegeben und $_SERVER['PATH_INFO'] wird auf den abschließenden Teil des URI gesetzt. Andernfalls wird ein 404-Antwortcode zurückgeben.

Wenn auf der Kommandozeile beim Starten des Webservers eine PHP-Datei angegeben wird, wird diese als "Router"-Skript verwendet. Dieses Skript wird dann zu Beginn jeder HTTP-Anfrage gestartet. Wenn dieses Skript false zurückgibt, dann wird die angefragte Ressource direkt zurückgegeben. Andernfalls wird die Ausgabe des Skripts zurückgegeben.

Standard-MIME-Typen werden für Dateien mit den folgenden Erweiterungen zurückgegeben: .3gp, .apk, .avi, .bmp, .css, .csv, .doc, .docx, .flac, .gif, .gz, .gzip, .htm, .html, .ics, .jpe, .jpeg, .jpg, .js, .kml, .kmz, .m4a, .mov, .mp3, .mp4, .mpeg, .mpg, .odp, .ods, .odt, .oga, .ogg, .ogv, .pdf, .pdf, .png, .pps, .pptx, .qt, .svg, .swf, .tar, .text, .tif, .txt, .wav, .webm, .wmv, .xls, .xlsx, .xml, .xsl, .xsd und .zip.

Changelog: Unterstützte MIME-Typen (Dateierweiterungen)
Version Beschreibung
5.5.12 .xml, .xsl und .xsd
5.5.7 .3gp, .apk, .avi, .bmp, .csv, .doc, .docx, .flac, .gz, .gzip, .ics, .kml, .kmz, .m4a, .mp3, .mp4, .mpg, .mpeg, .mov, .odp, .ods, .odt, .oga, .pdf, .pptx, .pps, .qt, .swf, .tar, .text, .tif, .wav, .wmv, .xls, .xlsx und .zip
5.5.5 .pdf
5.4.11 .ogg, .ogv und .webm
5.4.4 .htm und .svg
Changelog
Version Beschreibung
7.4.0 Der eingebaute Webserver kann so konfiguriert werden, dass mehrere Worker geforkt werden können, um Code zu testen, der mehrere gleichzeitige Anfragen erfordert. Dazu muss die Umgebungsvariable PHP_CLI_SERVER_WORKERS auf die Zahl der gewünschten Worker gesetzt werden, bevor der Server gestartet wird. Dies wird unter Windows nicht unterstützt.
Warnung

Dieses experimentelle Feature ist nicht für den Produktionseinsatz vorgesehen. Grundsätzlich ist der eingebaute Webserver nicht für den Produktionseinsatz vorgesehen.

Beispiel #1 Starten des Webservers

$ cd ~/public_html
$ php -S localhost:8000

Die Kommandozeile wird ausgeben:

PHP 5.4.0 Development Server started at Thu Jul 21 10:43:28 2011
Listening on localhost:8000
Document root is /home/me/public_html
Press Ctrl-C to quit

Nach URI-Anfragen für http://localhost:8000/ und http://localhost:8000/myscript.html wird die Kommandozeile in etwa so aussehen:

PHP 5.4.0 Development Server started at Thu Jul 21 10:43:28 2011
Listening on localhost:8000
Document root is /home/me/public_html
Press Ctrl-C to quit.
[Thu Jul 21 10:48:48 2011] ::1:39144 GET /favicon.ico - Request read
[Thu Jul 21 10:48:50 2011] ::1:39146 GET / - Request read
[Thu Jul 21 10:48:50 2011] ::1:39147 GET /favicon.ico - Request read
[Thu Jul 21 10:48:52 2011] ::1:39148 GET /myscript.html - Request read
[Thu Jul 21 10:48:52 2011] ::1:39149 GET /favicon.ico - Request read

Es ist zu beachten, dass bis zu PHP 7.4.0 symbolisch verknüpfte statische Ressourcen unter Windows nicht erreichbar waren, es sei denn, das Router-Skript würde diese verarbeiten.

Beispiel #2 Starten mit einer expliziten Document-Root

$ cd ~/public_html
$ php -S localhost:8000 -t foo/

Die Kommandozeile wird ausgeben:

PHP 5.4.0 Development Server started at Thu Jul 21 10:50:26 2011
Listening on localhost:8000
Document root is /home/me/public_html/foo
Press Ctrl-C to quit

Beispiel #3 Nutzung eines Router-Skripts

In diesem Beispiel werden bei Anfragen nach Bildern diese direkt angezeigt; bei Anfragen nach HTML-Dateien wird stattdessen "Willkommen in PHP!" angezeigt.

<?php
// router.php
if (preg_match('/\.(?:png|jpg|jpeg|gif)$/', $_SERVER["REQUEST_URI"])) {
return
false; // Liefere die angefragte Ressource direkt aus
} else {
echo
"<p>Willkommen in PHP!</p>";
}
?>
$ php -S localhost:8000 router.php

Beispiel #4 Prüfung auf die Verwendung des CLI-Webservers

Um ein Framework-Router-Skript sowohl während der Entwicklung mit dem CLI-Webserver als auch später mit einem Produktions-Webserver zu verwenden:

<?php
// router.php
if (php_sapi_name() == 'cli-server') {
/* statische Assets weiterleiten und false zurückgeben */
}
/* weiter mit den normalen index.php-Operationen */
?>
$ php -S localhost:8000 router.php

Beispiel #5 Behandlung nicht unterstützter Dateitypen

Wenn Sie statische Ressourcen ausliefern müssen, deren MIME-Typ vom CLI-Webserver nicht unterstützt wird, verwenden Sie:

<?php
// router.php
$path = pathinfo($_SERVER["SCRIPT_FILENAME"]);
if (
$path["extension"] == "el") {
header("Content-Type: text/x-script.elisp");
readfile($_SERVER["SCRIPT_FILENAME"]);
}
else {
return
FALSE;
}
?>
$ php -S localhost:8000 router.php

Beispiel #6 Zugriff auf den CLI-Webserver von anderen Computern aus

Sie können den Webserver wie folgt auf Port 8000 für jeden zugänglich machen:

$ php -S 0.0.0.0:8000
Warnung

Der eingebaute Webserver sollte nicht in einem öffentlichen Netzwerk verwendet werden.

add a note

User Contributed Notes 16 notes

up
123
jonathan at reinink dot ca
10 years ago
In order to set project specific configuration options, simply add a php.ini file to your project, and then run the built-in server with this flag:

php -S localhost:8000 -c php.ini

This is especially helpful for settings that cannot be set at runtime (ini_set()).
up
65
Mark Simon
7 years ago
It’s not mentioned directly, and may not be obvious, but you can also use this to create a virtual host. This, of course, requires the help of your hosts file.

Here are the steps:

1 /etc/hosts
127.0.0.1 www.example.com

2 cd [root folder]
php -S www.example.com:8000

3 Browser:
http://www.example.com:8000/index.php

Combined with a simple SQLite database, you have a very handy testing environment.
up
55
oan at vizrt dot com
7 years ago
I painfully experienced behaviour that I can't seem to find documented here so I wanted to save everyone from repeating my mistake by giving the following heads up:

When starting php -S on a mac (in my case macOS Sierra) to host a local server, I had trouble with connecting from legacy Java.

As it turned out, if you started the php server with
"php -S localhost:80"
the server will be started with ipv6 support only!

To access it via ipv4, you need to change the start up command like so:
"php -S 127.0.0.1:80"
which starts server in ipv4 mode only.
up
28
tamas at bartatamas dot hu
9 years ago
If your URI contains a dot, you'll lose the $_SERVER['PATH_INFO'] variable, when using the built-in webserver.
I wanted to write an API, and use .json ending in the URI-s, but then the framework's routing mechanism broke, and it took a lot of time to discover that the reason behind it was its router relying on $_SERVER['PATH_INFO'].

References:
https://bugs.php.net/bug.php?id=61286
up
29
Ivan Ferrer
10 years ago
On Windows you may find useful to have a phpserver.bat file in shell:sendto with the folowing:
explorer http://localhost:8888
rem check if arg is file or dir
if exist "%~1\" (
php -S localhost:8888 -t "%~1"
) else (
php -S localhost:8888 -t "%~dp1"
)

then for fast web testing you only have to SendTo a file or folder to this bat and it will open your explorer and run the server.
up
22
matthes at leuffen dot de
7 years ago
To output debugging information on the command line you can write output to php://stdout:

<?php
$path
= $_SERVER["SCRIPT_FILENAME"];

file_put_contents("php://stdout", "\nRequested: $path");
echo
"<p>Hello World</p>";
?>
up
2
deep at deepshah dot me
3 years ago
Listen on all addresses of IPv4:
php -S 0.0.0.0:80

Listen on all addresses of IPv6:
php -S [::0]:80
up
0
devoldemar
3 months ago
Built-in web server uses SAPI logging subsystem. Therefore all messages are written to standard error, and not to standard output stream.
If you want to save server logs into a file, the following command will work:
php -S 0.0.0.0:80 2>&1 | tee out.log
up
1
sony at sony-ak dot com
4 years ago
To send environment variable as long as with PHP built-in web server, type like this.

~$ MYENV=dev php -d variables_order=EGPCS -S 0.0.0.0:8000

On PHP script we can check with this code.

<?php
echo getenv('MYENV'); // print dev
up
1
dachund at gmail dot com
6 years ago
I fiddled around with the internal webserver and had issues regarding handling static files, that do not contain a dot and a file extension.

The webserver responded with 200 without any content for files with URIs like "/testfile".

I am not certain if this is a bug, but I created a router.php that now does not use the "return false;" operation in order to pass thru the static file by the internal webserver.

Instead I use fpassthru() to do that.

In addition to that, my router.php can be configured to...
- ... have certain index files, when requesting a directory
- ... configure regex routes, so that, if the REQUEST_URI matches the regex, a certain file or directory is requested instead. (something you would do with nginx config or .htaccess ModRewrite)

Maybe someone finds this helpful.

================================

<?php

$indexFiles
= ['index.html', 'index.php'];
$routes = [
'^/api(/.*)?$' => '/index.php'
];

$requestedAbsoluteFile = dirname(__FILE__) . $_SERVER['REQUEST_URI'];

// check if the the request matches one of the defined routes
foreach ($routes as $regex => $fn)
{
if (
preg_match('%'.$regex.'%', $_SERVER['REQUEST_URI']))
{
$requestedAbsoluteFile = dirname(__FILE__) . $fn;
break;
}
}

// if request is a directory call check if index files exist
if (is_dir($requestedAbsoluteFile))
{
foreach (
$indexFiles as $filename)
{
$fn = $requestedAbsoluteFile.'/'.$filename;
if (
is_file($fn))
{
$requestedAbsoluteFile = $fn;
break;
}
}
}

// if requested file does not exist or is directory => 404
if (!is_file($requestedAbsoluteFile))
{
header($_SERVER['SERVER_PROTOCOL'].' 404 Not Found');
printf('"%s" does not exist', $_SERVER['REQUEST_URI']);
return
true;
}

// if requested file is'nt a php file
if (!preg_match('/\.php$/', $requestedAbsoluteFile)) {
header('Content-Type: '.mime_content_type($requestedAbsoluteFile));
$fh = fopen($requestedAbsoluteFile, 'r');
fpassthru($fh);
fclose($fh);
return
true;
}

// if requested file is php, include it
include_once $requestedAbsoluteFile;
up
-3
dwingardjr at gmail dot com
6 years ago
Just a note to people who also use windows 8.1, or anyone who has had this problem when running the using the PHP server CLI.

`PHP -S localhost:8000 -t /public` <-- Not going to work.

`PHP -S localhost:8000 -t public` <-- Works!

And there is something else up in the notes saying something about you can't serve a project folder and a router file. Well, actually you can! At least for me.

`PHP -S localhost:8000 router.php -t public` <-- Perhaps someone tries this and it doesn't work.

`PHP -S localhost:8000 -t public router.php` <-- Works!
up
-17
Lukas
4 years ago
For serving static content like .css or .js and otherwise using a router (for me it was index.php) this worked out of the box for me:

php -S localhost:8000

Due to my router file was index.php. But

php -S localhost:8000 index.php

did not work, because my static files are not served via my router.
up
-20
gyunaev at gmail dot com
6 years ago
You can also print messages to the server's STDOUT via error_log().

Also the documentation doesn't make it clear that when you use router script if a PHP file is requested and you return false, the PHP file will be served (i.e. you do not need to load and eval it manually).
up
-31
ohcc at 163 dot com
7 years ago
$_SERVER['SERVER_ADDR'] is not defined when using php as the built-in commandline web server, so you can not use $_SERVER['SERVER_ADDR'] to detect the Server's IP address.

P.S.: This is tested on Windows with PHP 7.1 on 2016-12-22.

Below is the printed $_SERVER variable.

Array
(
[DOCUMENT_ROOT] => E:\Programs\PHPServer\www\srv
[REMOTE_ADDR] => 118.117.61.32
[REMOTE_PORT] => 10865
[SERVER_SOFTWARE] => PHP 7.1.0 Development Server
[SERVER_PROTOCOL] => HTTP/1.1
[SERVER_NAME] => 0.0.0.0
[SERVER_PORT] => 8080
[REQUEST_URI] => /
[REQUEST_METHOD] => GET
[SCRIPT_NAME] => /index.php
[SCRIPT_FILENAME] => E:\Programs\PHPServer\www\srv\index.php
[PHP_SELF] => /index.php
[HTTP_HOST] => www.wuxiancheng.cn:8080
[HTTP_CONNECTION] => keep-alive
[HTTP_CACHE_CONTROL] => max-age=0
[HTTP_UPGRADE_INSECURE_REQUESTS] => 1
[HTTP_USER_AGENT] => Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/55.0.2883.87 Safari/537.36
[HTTP_ACCEPT] => text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8
[HTTP_DNT] => 1
[HTTP_ACCEPT_ENCODING] => gzip, deflate, sdch
[HTTP_ACCEPT_LANGUAGE] => zh-CN,zh;q=0.8,en-US;q=0.6,en;q=0.4
[HTTP_COOKIE] => qbbs_2132_saltkey=fZ7509n5; qbbs_2132_lastvisit=1482156014; Hm_lvt_f812a4362ef73c80c4d13485d1ab3a49=1482159614; _ga=GA1.2.1594404236.1482159615; su=727vL6EEPLqjcyfJcad-za9eVYOh1i7e; Hm_lvt_6a65b0f2004e441e86ecea9c3562d997=1482232509,1482241896,1482242293,1482296586
[REQUEST_TIME_FLOAT] => 1482390410.65625
[REQUEST_TIME] => 1482390410
)
up
-19
Anonymous
2 years ago
If you have trouble with a project using both dynamic routes containing dots (giving unexpected 404 errors) and static file hosting paste this in your index.php

// Support cli server for local development
if (php_sapi_name() === 'cli-server') {
$fileName = __DIR__.parse_url($_SERVER["REQUEST_URI"], PHP_URL_PATH);
if (file_exists($fileName) && !is_dir($fileName)) return false;
}

Then run the internal server directly on the file:

php -S 127.0.0.1 index.php
up
-51
eyecatchup at gmail dot com
6 years ago
Note: The built-in web server has a file size limit. For files larger than 5 GB, it will always serve a "File not found" error page.
To Top