PHP 8.3.4 Released!

curl_getinfo

(PHP 4 >= 4.0.4, PHP 5, PHP 7, PHP 8)

curl_getinfoRuft Informationen zu einem bestimmten Transfer ab

Beschreibung

curl_getinfo(CurlHandle $handle, ?int $option = null): mixed

Gibt Informationen über den letzen Transfer zurück.

Parameter-Liste

handle

Ein von curl_init() zurückgegebenes cURL-Handle.

option

Dies kann eine der folgenden Konstanten sein:

Option Beschreibung
CURLINFO_CAINFO Der standardmäßige interne Pfad zur CA-Zertifikatsdatei
CURLINFO_CAPATH Der standardmäßige interne Pfad zum CA-Verzeichnis
CURLINFO_EFFECTIVE_URL Die letzte erfolgreiche URL
CURLINFO_HTTP_CODE Der letzte Antwortcode. Von cURL 7.10.8 an ist dies ein veralteter Alias von CURLINFO_RESPONSE_CODE
CURLINFO_FILETIME Die (Server-) Zeit der letzten Änderung des abgerufenen Dokuments, wenn die Option CURLOPT_FILETIME aktiviert ist; wenn -1 zurückgegeben wird, ist die Zeit unbekannt
CURLINFO_TOTAL_TIME Die Gesamtdauer des letzten Transfers in Sekunden
CURLINFO_NAMELOOKUP_TIME Die Zeit in Sekunden, bis die Auflösung des Hostnamens abgeschlossen war.
CURLINFO_CONNECT_TIME Die Dauer des Verbindungsaufbaus in Sekunden
CURLINFO_PRETRANSFER_TIME Die Zeit in Sekunden zwischen dem Start und dem eigentlichen Beginn des Empfangs
CURLINFO_STARTTRANSFER_TIME Die Zeit in Sekunden bis zur Übertragung des ersten Bytes
CURLINFO_REDIRECT_COUNT Die Anzahl der Weiterleitungen, wenn die Option CURLOPT_FOLLOWLOCATION aktiviert ist
CURLINFO_REDIRECT_TIME Die Zeit in Sekunden, die von allen Weiterleitungsschritten beansprucht wird, bevor der eigentliche Transfer beginnt, wenn die Option CURLOPT_FOLLOWLOCATION aktiviert ist
CURLINFO_REDIRECT_URL Bei deaktivierter CURLOPT_FOLLOWLOCATION-Option: die Weiterleitungs-URL, die in der letzten Transaktion gefunden wurde und als nächstes manuell angefordert werden sollte. Bei aktivierter CURLOPT_FOLLOWLOCATION-Option ist dies immer leer. Die Weiterleitungs-URL ist in diesem Fall in CURLINFO_EFFECTIVE_URL verfügbar
CURLINFO_PRIMARY_IP Die IP-Adresse der jüngsten Verbindung
CURLINFO_PRIMARY_PORT Der Ziel-Port der jüngsten Verbindung
CURLINFO_LOCAL_IP Die lokale (Quell-) IP-Adresse der jüngsten Verbindung
CURLINFO_LOCAL_PORT Der lokale (Quell-) Port der jüngsten Verbindung
CURLINFO_SIZE_UPLOAD Die Anzahl der gesendeten Bytes
CURLINFO_SIZE_DOWNLOAD Die Anzahl der empfangenen Bytes
CURLINFO_SPEED_DOWNLOAD Die durchschnittliche Download-Geschwindigkeit
CURLINFO_SPEED_UPLOAD Die durchschnittliche Upload-Geschwindigkeit
CURLINFO_HEADER_SIZE Die Gesamtgröße aller empfangenen Header
CURLINFO_HEADER_OUT Die gesendete Anfrage. Damit dies funktioniert, muss die Option CURLINFO_HEADER_OUT durch Aufruf von curl_setopt() zum Handle hinzugefügt werden
CURLINFO_REFERER Der Referrer-Header
CURLINFO_REQUEST_SIZE Die Gesamtgröße aller Anfragen; momentan nur für HTTP verfügbar
CURLINFO_RETRY_AFTER Die Information aus dem Retry-After:-Header oder Null, wenn es keinen gültigen Header gibt.
CURLINFO_SSL_VERIFYRESULT Das Ergebnis der Überprüfung des SSL-Zertifikats, angefordert durch das Setzen von CURLOPT_SSL_VERIFYPEER
CURLINFO_CONTENT_LENGTH_DOWNLOAD Die Größe des Downloads, ermittelt aus dem Content-Length:-Header
CURLINFO_CONTENT_LENGTH_UPLOAD Die festgesetzte Größe des Uploads
CURLINFO_CONTENT_TYPE Der Content-Type: des angeforderten Dokuments. NULL zeigt an, dass der Server keinen gültigen Content-Type:-Header gesendet hat
CURLINFO_PRIVATE Private Daten, die zu diesem cURL-Handle gehören und zuvor mit der Option CURLOPT_PRIVATE der Funktion curl_setopt() gesetzt wurden
CURLINFO_PROXY_ERROR Der detaillierte (SOCKS) Proxy-Fehlercode, wenn bei der letzten Übertragung ein CURLE_PROXY-Fehler aufgetreten ist. Der zurückgegebene Wert ist genau einer der CURLPX_*-Werte. Wenn kein Antwortcode verfügbar ist, lautet der Fehlercode CURLPX_OK.
CURLINFO_RESPONSE_CODE Der letzte Antwortcode
CURLINFO_HTTP_CONNECTCODE Der CONNECT-Antwortcode
CURLINFO_HTTPAUTH_AVAIL Eine Bitmaske, die die verfügbaren Authentifizierungsmethode(n) gemäß der vorherigen Antwort anzeigt
CURLINFO_PROXYAUTH_AVAIL Eine Bitmaske, die die verfügbaren Proxy-Authentifikationsmethode(n) gemäß der vorherigen Antwort anzeigt
CURLINFO_OS_ERRNO Die Fehlernummer (Errno) eines Verbindungsfehlers. Die Zahl ist OS- und systemabhängig.
CURLINFO_NUM_CONNECTS Die Anzahl der Verbindungen, die cURL erzeugen musste, um die vorherigen Übertragung durchzuführen
CURLINFO_SSL_ENGINES Die unterstützten OpenSSL-Crypto-Engines
CURLINFO_COOKIELIST Alle bekannten Cookies
CURLINFO_FTP_ENTRY_PATH Der Entry-Pfad des FTP-Servers
CURLINFO_APPCONNECT_TIME Die Zeitdauer in Sekunden, die bis zum SSL/SSH-Verbindungsaufbau/Handshake zum entfernten Server verstrichen ist
CURLINFO_CERTINFO Die TLS-Zertifikatskette
CURLINFO_CONDITION_UNMET Die Info über eine nicht eingehaltene Zeitbedingung
CURLINFO_RTSP_CLIENT_CSEQ Die nächste CSeq des RTSP-Clients
CURLINFO_RTSP_CSEQ_RECV Die zuletzt empfangene CSeq
CURLINFO_RTSP_SERVER_CSEQ Die nächste CSeq des RTSP-Servers
CURLINFO_RTSP_SESSION_ID Die RTSP-Session-ID
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T Die inhaltliche Länge des Downloads. Das ist der Wert, der aus dem Content-Length:-Feld gelesen wurde. -1, wenn die Größe nicht bekannt ist
CURLINFO_CONTENT_LENGTH_UPLOAD_T Die angegebene Größe des Uploads. -1, wenn die Größe nicht bekannt ist
CURLINFO_HTTP_VERSION Die Version, die in der letzten HTTP-Verbindung verwendet wurde. Der Rückgabewert ist eine der definierten CURL_HTTP_VERSION_*-Konstanten oder 0, wenn die Version nicht ermittelt werden kann
CURLINFO_PROTOCOL Das Protokoll, das in der letzten HTTP-Verbindung verwendet wurde. Der Rückgabewert ist genau einer der CURLPROTO_*-Werte
CURLINFO_PROXY_SSL_VERIFYRESULT Das Ergebnis der Zertifikatsprüfung, die angefordert wurde (durch Verwendung der Option CURLOPT_PROXY_SSL_VERIFYPEER). Wird nur für HTTPS-Proxies verwendet
CURLINFO_SCHEME Das URL-Schema, das für die jüngste Verbindung verwendet wurde
CURLINFO_SIZE_DOWNLOAD_T Die Gesamtanzahl von Bytes, die heruntergeladen wurden. Die Anzahl betrifft nur die letzte Übertragung, und wird für jede neue Übertragung zurückgesetzt
CURLINFO_SIZE_UPLOAD_T Die Gesamtanzahl von Bytes, die hochgeladen wurden
CURLINFO_SPEED_DOWNLOAD_T Die durchschnittliche Download-Geschwindigkeit in Bytes pro Sekunde, die CURL für den vollständigen Download gemessen hat
CURLINFO_SPEED_UPLOAD_T Die durchschnittliche Upload-Geschwindigkeit in Bytes pro Sekunde, die CURL für den vollständigen Upload gemessen hat
CURLINFO_APPCONNECT_TIME_T Die Zeit in Mikrosekunden, die vom Beginn bis zur Vollendung der SSL/SSH-Verbindung/des Handshakes zum Remote-Host vergangen ist
CURLINFO_CONNECT_TIME_T Die Gesamtdauer in Mikrosekunden, vom Beginn bis zur Vollendung der Verbindung zum Remote-Host (oder Proxy)
CURLINFO_FILETIME_T Die letzte Änderung des abgerufenen Dokuments (als Unix-Zeitstempel); eine Alternative zu CURLINFO_FILETIME, die es Systemen mit 32-Bit-Ganzzahlvariablen ermöglicht, Daten außerhalb des 32-Bit-Zeitstempelbereichs zu extrahieren
CURLINFO_NAMELOOKUP_TIME_T Die Dauer in Mikrosekunden vom Beginn bis zur Vervollständigung der Namensauflösung
CURLINFO_PRETRANSFER_TIME_T Die benötigte Zeit vom Beginn bis zum eigentlichen Beginn der Dateiübertragung in Mikrosekunden
CURLINFO_REDIRECT_TIME_T Die Gesamtdauer in Mikrosekunden für alle Weiterleitungsschritte einschließlich Namenslookup, Verbindung, Vorübertragung und Übertragung, bis zum Beginn der eigentlichen Transaktion
CURLINFO_STARTTRANSFER_TIME_T Die benötigte Zeit in Mikrosekunden vom Beginn bis zum Empfang des ersten Bytes
CURLINFO_TOTAL_TIME_T Die Gesamtdauer in Mikrosekunden für die vorhergehende Übertragung einschließlich Namensauflösung, TCP-Verbindung usw.

Rückgabewerte

Wird der Parameter option angegeben, wird der entsprechende Wert zurückgegeben. Andernfalls liefert die Funktion ein assoziatives Array mit den folgenden Elementen zurück (analog zum Parameter option), oder false im Fehlerfall:

  • "url"
  • "content_type"
  • "http_code"
  • "header_size"
  • "request_size"
  • "filetime"
  • "ssl_verify_result"
  • "redirect_count"
  • "total_time"
  • "namelookup_time"
  • "connect_time"
  • "pretransfer_time"
  • "size_upload"
  • "size_download"
  • "speed_download"
  • "speed_upload"
  • "download_content_length"
  • "upload_content_length"
  • "starttransfer_time"
  • "redirect_time"
  • "certinfo"
  • "primary_ip"
  • "primary_port"
  • "local_ip"
  • "local_port"
  • "redirect_url"
  • "request_header" (Dies ist nur gesetzt, wenn die Option CURLINFO_HEADER_OUT durch einen vorherigen Aufruf von curl_setopt() gesetzt wurde)
Es ist zu beachten, dass private Daten nicht im assoziativen Array enthalten sind, sondern individuell mit der Option CURLINFO_PRIVATE abgerufen werden müssen.

Beispiele

Beispiel #1 curl_getinfo()-Beispiel

<?php
// Eine cURL-Ressource erstellen
$ch = curl_init('http://www.example.com/');

// ausführen
curl_exec($ch);

// prüfen, ob ein Fehler aufgetreten ist
if (!curl_errno($ch)) {
$info = curl_getinfo($ch);
echo
'Es wurden ', $info['total_time'], ' Sekunden benötigt für eine Anfrage an ', $info['url'], "\n";
}

// Ressource schliessen
curl_close($ch);
?>

Beispiel #2 curl_getinfo()-Beispiel mit dem Parameter option

<?php
// Eine cURL-Ressource erstellen
$ch = curl_init('http://www.example.com/');

// ausführen
curl_exec($ch);

// HTTP-Status-Code prüfen
if (!curl_errno($ch)) {
switch (
$http_code = curl_getinfo($ch, CURLINFO_HTTP_CODE)) {
case
200: # OK
break;
default:
echo
'Unerwarteter HTTP-Code: ', $http_code, "\n";
}
}

// Ressource schliessen
curl_close($ch);
?>

Anmerkungen

Hinweis:

Informationen, die mit dieser Funktion gesammelt wurden, bleiben erhalten, wenn das Handle wiederverwendet wird. Das bedeutet, dass außer wenn eine Statistik intern von dieser Funktion überschrieben wird, die vorherige Info zurückgegeben wird.

add a note

User Contributed Notes 14 notes

up
57
ssttoo at hotmail dot com
19 years ago
Here are the response codes ready for pasting in an ini-style file. Can be used to provide more descriptive message, corresponding to 'http_code' index of the arrray returned by curl_getinfo().
These are taken from the W3 consortium HTTP/1.1: Status Code Definitions, found at
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html

[Informational 1xx]
100="Continue"
101="Switching Protocols"

[Successful 2xx]
200="OK"
201="Created"
202="Accepted"
203="Non-Authoritative Information"
204="No Content"
205="Reset Content"
206="Partial Content"

[Redirection 3xx]
300="Multiple Choices"
301="Moved Permanently"
302="Found"
303="See Other"
304="Not Modified"
305="Use Proxy"
306="(Unused)"
307="Temporary Redirect"

[Client Error 4xx]
400="Bad Request"
401="Unauthorized"
402="Payment Required"
403="Forbidden"
404="Not Found"
405="Method Not Allowed"
406="Not Acceptable"
407="Proxy Authentication Required"
408="Request Timeout"
409="Conflict"
410="Gone"
411="Length Required"
412="Precondition Failed"
413="Request Entity Too Large"
414="Request-URI Too Long"
415="Unsupported Media Type"
416="Requested Range Not Satisfiable"
417="Expectation Failed"

[Server Error 5xx]
500="Internal Server Error"
501="Not Implemented"
502="Bad Gateway"
503="Service Unavailable"
504="Gateway Timeout"
505="HTTP Version Not Supported"

And an example usage:
<?php
$ch
= curl_init(); // create cURL handle (ch)
if (!$ch) {
die(
"Couldn't initialize a cURL handle");
}
// set some cURL options
$ret = curl_setopt($ch, CURLOPT_URL, "http://mail.yahoo.com");
$ret = curl_setopt($ch, CURLOPT_HEADER, 1);
$ret = curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
$ret = curl_setopt($ch, CURLOPT_RETURNTRANSFER, 0);
$ret = curl_setopt($ch, CURLOPT_TIMEOUT, 30);

// execute
$ret = curl_exec($ch);

if (empty(
$ret)) {
// some kind of an error happened
die(curl_error($ch));
curl_close($ch); // close cURL handler
} else {
$info = curl_getinfo($ch);
curl_close($ch); // close cURL handler

if (empty($info['http_code'])) {
die(
"No HTTP code was returned");
} else {
// load the HTTP codes
$http_codes = parse_ini_file("path/to/the/ini/file/I/pasted/above");

// echo results
echo "The server responded: <br />";
echo
$info['http_code'] . " " . $http_codes[$info['http_code']];
}

}
?>
up
22
vince
13 years ago
CURLINFO_HTTP_CODE does not return a string, as the docs say, but rather an integer.

<?php
$c
= curl_init('http://www.example.com/');
if(
curl_getinfo($c, CURLINFO_HTTP_CODE) === '200') echo "CURLINFO_HTTP_CODE returns a string.";
if(
curl_getinfo($c, CURLINFO_HTTP_CODE) === 200) echo "CURLINFO_HTTP_CODE returns an integer.";
curl_close($c);
?>

returns

"CURLINFO_HTTP_CODE returns an integer."
up
7
public-mail at alekciy dot ru
8 years ago
Note, header_size include "\r\n\r\n". So if you use CURLOPT_FOLLOWLOCATION>0, CURLOPT_HEADER=true, CURLOPT_RETURNTRANSFER=true right way splite header/body:

$response = curl_exec($ch);
$curl_info = curl_getinfo($ch);
curl_close($ch);
$header_size = $curl_info['header_size'];
$header = substr($response, 0, $header_size);
$body = substr($response, $header_size);
up
17
nikita dot bulatenko at gmail dot com
11 years ago
CURLINFO_SSL_VERIFYRESULT error codes:
0: ok the operation was successful.
2 : unable to get issuer certificate
3: unable to get certificate CRL
4: unable to decrypt certificate's signature
5: unable to decrypt CRL's signature
6: unable to decode issuer public key
7: certificate signature failure
8: CRL signature failure
9: certificate is not yet valid
10: certificate has expired
11: CRL is not yet valid
12:CRL has expired
13: format error in certificate's notBefore field
14: format error in certificate's notAfter field
15: format error in CRL's lastUpdate field
16: format error in CRL's nextUpdate field
17: out of memory
18: self signed certificate
19: self signed certificate in certificate chain
20: unable to get local issuer certificate
21:unable to verify the first certificate
22: certificate chain too long
23: certificate revoked
24: invalid CA certificate
25: path length constraint exceeded
26: unsupported certificate purpose
27: certificate not trusted
28: certificate rejected
29: subject issuer mismatch
30: authority and subject key identifier mismatch
31: authority and issuer serial number mismatch
32: key usage does not include certificate signing
50: application verification failure
details at http://www.openssl.org/docs/apps/verify.html#VERIFY_OPERATION
up
5
qrworld.net
9 years ago
Here you have a function that I use to get the content of a URL using cURL. This uses curl_getinfo to know if it is a regular URL or maybe a redirection.

I hope it would be useful for you:

function getUrlContent($url){
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_USERAGENT, 'Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)');
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 5);
curl_setopt($ch, CURLOPT_TIMEOUT, 5);
$data = curl_exec($ch);
$httpcode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);
return ($httpcode>=200 && $httpcode<300) ? $data : false;
}

The source comes from this website:

http://softontherocks.blogspot.com/2014/11/descargar-el-contenido-de-una-url.html
up
6
nemetral
15 years ago
Just a quick note: if you want to use curl_getinfo() with option CURLINFO_HEADER_OUT in order to debug your cURL request, you must add curl_setopt($handle, CURLINFO_HEADER_OUT, true); first while specifying the options.
up
3
bg at enativ dot com
10 years ago
curl_getinfo($ch) will also return 'redirect_url' if there is one (even if CURLOPT_FOLLOWLOCATION set to false).
I don't know why it's not in the doc..
up
2
Mark Evers
16 years ago
There is a constant missing from that list. CURLINFO_REDIRECT_COUNT will give you the number of redirects it went through if CURLOPT_FOLLOWLOCATION was set.
up
0
pluk77 at gmail dot com
14 days ago
You can still get the SSL verification result using CURLINFO_SSL_VERIFYRESULT when setting CURLOPT_SSL_VERIFYPEER to FALSE.

Full list of result codes:

0: ok
1: unspecified certificate verification error
2: unable to get issuer certificate
3: unable to get certificate CRL
4: unable to decrypt certificate's signature
5: unable to decrypt CRL's signature
6: unable to decode issuer public key
7: certificate signature failure
8: CRL signature failure
9: certificate is not yet valid
10: certificate has expired
11: CRL is not yet valid
12: CRL has expired
13: format error in certificate's notBefore field
14: format error in certificate's notAfter field
15: format error in CRL's lastUpdate field
16: format error in CRL's nextUpdate field
17: out of memory
18: self-signed certificate
19: self-signed certificate in certificate chain
20: unable to get local issuer certificate
21: unable to verify the first certificate
22: certificate chain too long
23: certificate revoked
24: issuer certificate doesn't have a public key
25: path length constraint exceeded
26: unsuitable certificate purpose
27: certificate not trusted
28: certificate rejected
29: subject issuer mismatch
30: authority and subject key identifier mismatch
31: authority and issuer serial number mismatch
32: key usage does not include certificate signing
33: unable to get CRL issuer certificate
34: unhandled critical extension
35: key usage does not include CRL signing
36: unhandled critical CRL extension
37: invalid non-CA certificate (has CA markings)
38: proxy path length constraint exceeded
39: key usage does not include digital signature
40: proxy certificates not allowed, please set the appropriate flag
41: invalid or inconsistent certificate extension
42: invalid or inconsistent certificate policy extension
43: no explicit policy
44: different CRL scope
45: unsupported extension feature
46: RFC 3779 resource not subset of parent's resources
47: permitted subtree violation
48: excluded subtree violation
49: name constraints minimum and maximum not supported
50: application verification failure
51: unsupported name constraint type
52: unsupported or invalid name constraint syntax
53: unsupported or invalid name syntax
54: CRL path validation error
55: path loop
56: Suite B: certificate version invalid
57: Suite B: invalid public key algorithm
58: Suite B: invalid ECC curve
59: Suite B: invalid signature algorithm
60: Suite B: curve not allowed for this LOS
61: Suite B: cannot sign P-384 with P-256
62: hostname mismatch
63: email address mismatch
64: IP address mismatch
65: no matching DANE TLSA records
66: EE certificate key too weak
67: CA certificate key too weak
68: CA signature digest algorithm too weak
69: invalid certificate verification context
70: issuer certificate lookup error
71: Certificate Transparency required, but no valid SCTs found
72: proxy subject name violation
73: OCSP verification needed
74: OCSP verification failed
75: OCSP unknown cert
76: Cannot find certificate signature algorithm
77: subject signature algorithm and issuer public key algorithm mismatch
78: cert info signature and signature algorithm mismatch
79: invalid CA certificate
80: Path length invalid for non-CA cert
81: Path length given without key usage keyCertSign
82: Key usage keyCertSign invalid for non-CA cert
83: Issuer name empty
84: Subject name empty
85: Missing Authority Key Identifier
86: Missing Subject Key Identifier
87: Empty Subject Alternative Name extension
89: Basic Constraints of CA cert not marked critical
88: Subject empty and Subject Alt Name extension not critical
90: Authority Key Identifier marked critical
91: Subject Key Identifier marked critical
92: CA cert does not include key usage extension
93: Using cert extension requires at least X509v3
94: Certificate public key has explicit ECC parameters
95: Raw public key untrusted, no trusted keys configured

source: https://github.com/openssl/openssl/blob/master/include/openssl/x509_vfy.h.in
https://github.com/openssl/openssl/blob/master/crypto/x509/x509_txt.c
up
0
c dot ball1729 at gmail dot com
9 months ago
A note about $curl_info['header_size'] (in response to the example above).

Note that the total includes the size of any received headers suppressed by CURLOPT_SUPPRESS_CONNECT_HEADERS (see: https://curl.se/libcurl/c/CURLINFO_HEADER_SIZE.html) so if you are using a proxy which adds additional headers along with this option, $curl_info['header_size'] will give you the wrong string index based on the headers available in PHP. i.e., it will eat in to the start of the response instead of being the index of the beginning of the response.
up
0
torres dot krys at gmail dot com
8 years ago
If you use curl option CURLOPT_NOBODY = true to test if distant url is available, any sites can send you an http code 400 like Cdiscount Wsdl :

$ch = @curl_init($wsdl);

if($ch === false)
return false;

@curl_setopt($ch, CURLOPT_HEADER ,true); // we want headers
@curl_setopt($ch, CURLOPT_NOBODY ,true); // dont need body
@curl_setopt($ch, CURLOPT_RETURNTRANSFER ,true); // catch output (do NOT print!)

@curl_exec($ch);

if(@curl_errno($ch)){ // should be 0
@curl_close($ch);
return false;
}

$code = @curl_getinfo($ch, CURLINFO_HTTP_CODE);

Modifying CURLOPT_NOBODY to false, http code sent is 200 otherwise http code is 400 !!!
up
0
Anonymous
13 years ago
The main doc neglects to mention that when the CURLINFO_HEADER_OUT option is set the array returned by this function will included a new property, request_header, that is a string of the headers sent in the request.
up
-2
Curly
8 years ago
If you call curl_reset() on a handle that has already been passed to curl_exec(), and then perform a curl_getinfo() on the same handle, you may expect that you get the same result as if you called curl_getinfo() immediately after curl_init(). This is not the case, however. cURL will return the data from the previous execution. If you want to completely reset you actually need to unset the cURL handle and recreate a new one.
up
-15
luiheidsgoeroe at hotmail dot com
16 years ago
Keep in mind that for CURLOPT_RETURNTRANSFER it has to be set with curl_setopt() before execution:

This doesn't work:
<?php
$ch
= curl_init();
curl_setopt($ch, CURLOPT_URL, "http://www.example.com/");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_exec($ch);
var_dump(curl_getinfo($ch,CURLINFO_HEADER_OUT));
?>

This works:
<?php
$ch
= curl_init();
curl_setopt($ch, CURLOPT_URL, "http://www.example.com/");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLINFO_HEADER_OUT, true);
curl_exec($ch);
var_dump(curl_getinfo($ch,CURLINFO_HEADER_OUT));
?>
To Top