PHP 8.3.4 Released!

Fortschritt eines Uploads in einer Session

Wenn die Ini-Option session.upload_progress.enabled aktiviert ist, kann PHP den Upload-Fortschritt der einzelnen hochgeladenen Dateien verfolgen. Die von PHP bereitgestellten Daten sind für den eigentlichen Upload-Vorgang selbst nicht nutzbar, aber während des Datei-Uploads kann eine Anwendung eine POST-Anfrage an einen separaten Endpunkt senden (z. B. über XHR), um den Status zu ermitteln.

Der Upload-Fortschritt steht während des Upload-Vorgangs in der Superglobalen $_SESSION zur Verfügung und bei einer POST-Anfrage nach der Variablen mit dem in der ini-Konfiguration session.upload_progress.name hinterlegten Namen. Wenn PHP eine solche POST-Anfrage erkennt, wird ein Array mit Informationen in der $_SESSION hinterlegt. Die Informationen werden mit dem aus den ini-Konfigurationen session.upload_progress.prefix und session.upload_progress.name zusammengesetzten Index gespeichert. Der Schlüssel wird dabei typischerweise aus den ini-Konfigurationen zusammengesetzt, zum Beispiel:

<?php
$key
= ini_get("session.upload_progress.prefix") . $_POST[ini_get("session.upload_progress.name")];
var_dump($_SESSION[$key]);
?>

Es ist auch möglich, den Upload-Vorgang abzubrechen, indem der Session-Wert $_SESSION[$key]["cancel_upload"] auf true gesetzt wird. Wenn mehrere Dateien in der gleichen Anfrage übertragen werden, werden dabei nur der Upload der in der Verarbeitung befindlichen Datei und alle ausstehenden Datei-Uploads abgebrochen. Bereits erfolgreich übertragene Dateien werden nicht entfernt. Wenn ein Upload auf diese Weise abgebrochen wird, enthält der error-Schlüssel des $_FILES-Arrays den Wert UPLOAD_ERR_EXTENSION.

Die Ini-Konfigurationen session.upload_progress.freq und session.upload_progress.min_freq steuern, wie häufig die Upload-Fortschrittsinformationen neu berechnet werden sollen. Mit angemessenen Einstellungen bei diesen zwei Optionen ist der Aufwand für diese Funktion sehr gering.

Beispiel #1 Beispiel-Informationen

Beispiel für den Formularaufbau des Upload-Fortschritts.

<form action="upload.php" method="POST" enctype="multipart/form-data">
 <input type="hidden" name="<?php echo ini_get("session.upload_progress.name"); ?>" value="123" />
 <input type="file" name="file1" />
 <input type="file" name="file2" />
 <input type="submit" />
</form>

Die gespeicherten Daten in der Session sehen wie folgt aus:

<?php
$_SESSION
["upload_progress_123"] = array(
"start_time" => 1234567890, // Anfragezeitpunkt
"content_length" => 57343257, // POST-Gesamtdatenmenge (in Bytes)
"bytes_processed" => 453489, // Menge der empfangenen und verabreiteten Daten (in Bytes)
"done" => false, // true, wenn die POST-Datenverarbeitung beendet ist (erfolgreich oder nicht)
"files" => array(
0 => array(
"field_name" => "file1", // Name des <input/>-Feldes
// Die nächsten drei Elemente entsprechen den Angaben in $_FILES
"name" => "foo.avi",
"tmp_name" => "/tmp/phpxxxxxx",
"error" => 0,
"done" => true, // true, wenn die POST-Datenverarbeitung dieser Datei beendet ist
"start_time" => 1234567890, // Zeitpunkt, an dem die Verarbeitung der Datei begonnen hat
"bytes_processed" => 57343250, // Anzahl der empfangenen und verarbeiteten Daten dieser Datei (in Bytes)
),
// Eine weitere Datei, die noch nicht komplett hochgeladen ist, in derselben Anfrage
1 => array(
"field_name" => "file2",
"name" => "bar.avi",
"tmp_name" => NULL,
"error" => 0,
"done" => false,
"start_time" => 1234567899,
"bytes_processed" => 54554,
),
)
);

Warnung

Damit dies richtig funktioniert, muss die Anfragepufferung des Webservers deaktiviert sein, sonst sieht PHP den Datei-Upload möglicherweise erst, wenn er abgeschlossen ist. Server wie Nginx sind bekannt dafür, große Anfragen zu puffern.

Achtung

Die Upload-Fortschrittsinformationen werden in die Session geschrieben, bevor irgendein Skript ausgeführt wird. Daher führt die Änderung des Session-Namens per ini_set() oder session_name() zu einer Session ohne die Upload-Fortschrittsinformationen.

add a note

User Contributed Notes 12 notes

up
165
s.zarges
11 years ago
Note, this feature doesn't work, when your webserver is runnig PHP via FastCGI. There will be no progress informations in the session array.
Unfortunately PHP gets the data only after the upload is completed and can't show any progress.

I hope this informations helps.
up
63
howtomakeaturn
8 years ago
ATTENTION:

Put the upload progress session name input field BEFORE your file field in the form :

<form action="upload.php" method="POST" enctype="multipart/form-data">
<input type="hidden" name="<?php echo ini_get("session.upload_progress.name"); ?>" value="123" />
<input type="file" name="file1" />
<input type="file" name="file2" />
<input type="submit" />
</form>

If you make it after your file field, you'll waste a lot of time figuring why (just like me ...)

The following form will make you crazy and waste really a lot of time:

<form action="upload.php" method="POST" enctype="multipart/form-data">
<input type="file" name="file1" />
<input type="file" name="file2" />
<input type="hidden" name="<?php echo ini_get("session.upload_progress.name"); ?>" value="123" />
<input type="submit" />
</form>

DON'T do this!
up
24
Anonymous
10 years ago
While the example in the documentation is accurate, the description is a bit off. To clarify:

PHP will populate an array in the $_SESSION, where the index is a concatenated value of the session.upload_progress.prefix and the VALUE of the POSTed session.upload_progress.name variable.
up
14
isius
11 years ago
If you're seeing
"PHP Warning: Unknown: The session id is too long or contains illegal characters, valid characters are a-z, A-Z, 0-9 and '-,' in Unknown on line 0",
then a misplaced input could be the cause. It's worth mentioning again that the hidden element MUST be before the file elements.
up
6
jortsc at gmail dot com
10 years ago
Note that if you run that code and you print out the content of $_SESSSION[$key] you get an empty array due that session.upload_progress.cleanup is on by default and it cleans the progress information as soon as all POST data has been read.

Set it to Off or 0 to see the content of $_SESSION[$key].
up
2
alice at librelamp dot com
7 years ago
There were two gotchas that got me with implementing this.

The first - if you use session_name() to change the name of sessions, this will not work. I discovered this by looking at phpinfo() and seeing that is saw a different session name.

At least in Apache, a better way to set the session is in your apache config use

php_value session.name "your custom name"

It goes within the Directory directive, might work in .htaccess - I don't know.

-=-

Secondly - in apache, don't use mod_mpm_prefork.so

That was the problem I had, that's the default in CentOS 7.

The problem is it causes Apache to wait with any additional requests until the upload is finished.

Commenting that module out and using mod_mpm_worker.so instead fixed that problem, and the progress meter worked.
up
2
ricki at rocker dot com
8 years ago
session.upload_progress updates completely ignore custom session handlers set via session_set_save_handler()
up
5
nihaopaul at gmail dot com
11 years ago
it should be noted that the hidden element come before the file element otherwise you wont get any updates.
up
1
StrateGeyti
9 years ago
It seems like if you send a form with the field like :

<?php echo '<input type="hidden" name="'.ini_get('session.upload_progress.name') .'" value="123" />'; ?>

without any field type "file", the server respons will be an 500 error.
up
2
Anonymous
10 years ago
dont't forget, that the session has to be initialized before the form is generated, otherwise the mentioned example above won't work.
up
-12
wilsonr at st dot com
9 years ago
If you have upload progress enabled in your php.ini, and you have

<form enctype="multipart/form-data" ...
<input type="hidden" name="PHP_SESSION_UPLOAD_PROGRESS" ...

in your form, but you DON'T specify an input with 'type="file"', you may lose your session ID. I am using PHP 5.5 and I lose my session ID on the second loading of such a page. To prevent this, you can use a dummy input as follows:

<form enctype="multipart/form-data" ... >
<input type="hidden" name="PHP_SESSION_UPLOAD_PROGRESS" ... />
<input type="file"' name="dummy" style="display="none;" ... />
To Top