PHP 8.3.4 Released!

stream_filter_append

(PHP 4 >= 4.3.0, PHP 5, PHP 7, PHP 8)

stream_filter_appendПрикрепить фильтр к потоку

Описание

stream_filter_append(
    resource $stream,
    string $filtername,
    int $read_write = ?,
    mixed $params = ?
): resource

Добавляет filtername в список фильтров, прикреплённых к stream.

Список параметров

stream

Целевой поток.

filtername

Название фильтра.

read_write

По умолчанию stream_filter_append() будет прикреплять фильтр к цепочке фильтров чтения, если файл был открыт для чтения (т. е. режим файла: r, и/или +). Фильтр также будет прикреплён к цепочке фильтров записи, если файл был открыт для записи (т. е. режим файла: w, a, и/или +). Константы STREAM_FILTER_READ, STREAM_FILTER_WRITE и/или STREAM_FILTER_ALL также могут быть переданы в параметре read_write, чтобы переопределить это поведение.

params

Этот фильтр будет добавлен с указанными params к концу списка и, таким образом, будет вызван последним в списке потоковых операций. Чтобы добавить фильтр в начало списка, используйте stream_filter_prepend().

Возвращаемые значения

Возвращает ресурс в случае успешного выполнения или false при неудаче. Ресурс должен быть использован для ссылки на этот экземпляр фильтра во время вызова stream_filter_remove().

Вернёт false, если stream не является ресурсом или если filtername не найден.

Примеры

Пример #1 Контроль применения фильтров

<?php
/* Открываем тестовый файл для чтения и записи */
$fp = fopen('test.txt', 'w+');

/* Прикрепляем фильтр ROT13 к
* цепочке фильтров записи, но не к
* цепочке фильтров чтения */
stream_filter_append($fp, "string.rot13", STREAM_FILTER_WRITE);

/* Запишем простую строку в файл
* она будет преобразована при помощи ROT13
* на выходе */
fwrite($fp, "This is a test\n");

/* Назад к началу файла */
rewind($fp);

/* Прочитаем содержимое файла.
* Если фильтр также был бы прикреплён к
* цепочке фильтров чтения, мы бы увидели
* преобразованный при помощи ROT13 текст в исходном состоянии */
fpassthru($fp);

fclose($fp);

/* Ожидаемый вывод
---------------

Guvf vf n grfg

*/
?>

Примечания

Замечание: При использовании пользовательских фильтров
Сначала должна быть вызвана функция stream_filter_register() для того, чтобы зарегистрировать желаемый пользовательский фильтр на имя filtername.

Замечание: Потоковые данные читаются из ресурсов (как локальных, так удалённых) по кускам, и любые невостребованные данные сохраняются во внутренних буферах. Когда новый фильтр добавляется в конец потока, то данные во внутренних буферах обрабатываются через новый фильтр. Это отличается от поведения функции stream_filter_prepend().

Замечание: Когда фильтр добавляется для чтения и записи, создаются два экземпляра фильтра. Функция stream_filter_append() должна быть вызвана дважды с STREAM_FILTER_READ и STREAM_FILTER_WRITE чтобы получить оба ресурса фильтра.

Смотрите также

add a note

User Contributed Notes 5 notes

up
7
Dan J
8 years ago
Note that stream filters applied to STDOUT are not called when outputting via echo or print.

This is easily demonstrated with the standard ROT13 filter:
<?php
stream_filter_append
( STDOUT, "string.rot13" );

print
"Hello PHP\n";
// Prints "Hello PHP"

fprintf( STDOUT, "Hello PHP\n" );
// Prints "Uryyb CUC"
?>

If you want to filter STDOUT, you may have better luck with an output buffering callback added via ob_start:
http://php.net/manual/en/function.ob-start.php

At the time of this writing, there is an open PHP feature request to support echo and print for stream filters:
https://bugs.php.net/bug.php?id=30583
up
7
dlvoy
15 years ago
While using compression filters on a large set of files during one script invocation i've got
Fatal error: Allowed memory size of xxx bytes exhausted
even when my max memory limit settings was insane high (128MB)

Workaround is to remember to remove filter after work done with stream_filter_remove:

<?php
foreach($lot_of_files as $filename)
{
$fp = fopen($filename, 'rb');
$filter_params = array('level' => 2, 'window' => 15, $memory => 6);
$s_filter = stream_filter_append($fp, 'zlib.deflate', STREAM_FILTER_READ, $filter_params);
// here stream-operating code

stream_filter_remove($s_filter);

fclose($fp);
}
?>
up
4
net_navard at yahoo dot com
18 years ago
Hello firends

The difference betweem adding a stream filter first or last in the filte list in only the order they will be applied to streams.

For example, if you're reading data from a file, and a given filter is placed in first place with stream_filter_prepend()the data will be processed by that filter first.

This example reads out file data and the filter is applied at the beginning of the reading operation:

<?php
/* Open a test file for reading */
$fp = fopen("test.txt", "r");
/* Apply the ROT13 filter to the
* read filter chain, but not the
* write filter chain */
stream_filter_prepend($fp, "string.rot13",
STREAM_FILTER_READ);
// read file data
$contents=fread($fp,1024);
// file data is first filtered and stored in $contents
echo $contents;
fclose($fp);
?>

On the other hand, if stream_filter_append() is used, then the filter will be applied at the end of the data operation. The thing about this is only the order filters are applied to streams. Back to the example, it's not the same thing removing new lines from file data and then counting the number of characters, than performing the inverse process. In this case, the order that filters are applied to stream is important.

This example writes a test string to a file. The filter is applied at the end of the writing operation:

<?php
/* Open a test file for writing */
$fp = fopen("test.txt", "w+");
/* Apply the ROT13 filter to the
* write filter chain, but not the
* read filter chain */
stream_filter_append($fp, "string.rot13",
STREAM_FILTER_WRITE);
/* Write a simple string to the file
* it will be ROT13 transformed at the end of the
stream operation
* way out */
fwrite($fp, "This is a test\n"); // string data is
first written, then ROT13 tranformed and lastly
written to file
/* Back up to the beginning of the file */
rewind($fp);
$contents=fread($fp,512);
fclose($fp);
echo
$contents;
?>

In the first case, data is transformed at the end of the writing operation, while in the second one, data is first filtered and then stored in $contents.

With Regards
Hossein
up
1
Sbastien
2 years ago
Available internal filters are listed here :

https://www.php.net/manual/filters.php
up
0
TingSong
1 year ago
To decompress a gzipped stream:

<?php
$stream
= $s3_client->getReadStream('somefile.csv.gz');
stream_filter_append($stream, 'zlib.inflate', STREAM_FILTER_READ, ['window' => 15+16]);

// read the decompressed line directly
$line = fgets($stream);
$columns = str_getcsv($line);

// process the data in columns
?>

As the doc of zlib https://www.zlib.net/manual.html#Advanced

The 'window' parameter between 8 and 15 specified the window size from 2⁸ to 2¹⁵ bytes. It can be added by 16 for wrapping with gzip header and trailer instead of zlib wrapper.

And, window could be -8..-15 for unwrapping RAW deflate data.
To Top